#1 Free Tablecloth Size Calculator

Calculate the ideal tablecloth size for your square, oval, rectangular, or round tables with our easy-to-use calculator.

Tablecloth Size Calculator

With this calculator, you can easily take into account the desired drop length and drop width to ensure a perfect fit for your table.

With just a few simple steps, you can have the information you need to order the perfect tablecloth for your next event or gathering.

• First, you will need to select the shape of your table from the dropdown menu. The options available are square, oval, rectangular, and round.

• Once you have selected the shape of your table, the relevant input fields will be displayed for you to enter the dimensions of your table.

• For square, oval, and rectangular tables, you will need to enter the length and width of the table. For round tables, you will need to enter the diameter of the table.

• Next, you will need to enter the drop length and drop width that you desire for your tablecloth.

• These are the measurements of the overhang of the tablecloth on the sides of the table.

• After entering all of the required information, you can then click the “Calculate” button.

• The calculator will then use the dimensions you entered to determine the size of the tablecloth that is needed.

The results will be displayed in the “result” section of the calculator, showing the tablecloth’s length, width, and diameter (if applicable).

Tablecloth Size Guides

Hey, if you’re not sure about tablecloths or dimensions and can’t use our calculator correctly, here’s a simple guide for you to follow.

We added several tablecloth size charts in several sections.

Extend the Table to Its Original Size

Some tables may have removable leaves that alter their size after use.

If your table may have this system, decide the preferred size for your purposes.

If you need to use the tablecloth regularly, consider the size of the table that you use for normal purposes. 

But if you want a formal tablecloth for an entertaining quest, consider the extended size of your table. 

Despite this, if you desire one size table cloth for all purposes, measure the table to its maximum size and add around 6 inches for hanging over the edge.

However, the tablecloth may seem uneven after shrinking. 

Measure the Table Length and Width

Measure the table using tape along the longest side of the table.

For oval shape table, Instead of measuring the outer edges, measure in the center of the table and note it.  Measure the table’s horizontal dimension at the right angle. 

Determine the Drop

The extra length of the tablecloth that hangs below the surface is drop length. typically dining room tablecloth requires around 6 to 12 inches drop.

But if you need a more formal look or have unattractive table legs, reach the tablecloth to the ground. 

To determine the preferred drop length, hold a piece of cloth downward from the edge of the table. 

Calculate the Tablecloth

A general rule of thumb is that multiply the drop length by two and adds the result to the length of the table and the width of the table to get the actual tablecloth size.

Below is the formula for calculating tablecloths of different shape table:

Rectangular Tablecloth 

Considering the same drop length:

Tablecloth length = table length + drop * 2

Tablecloth width = table width + drop * 2

Following some standard rectangular and overall size tables along with recommended tablecloth size

Square Tablecloth

You can apply the same formula as the rectangular tablecloth to determine the tablecloth of the square table.

More excitingly, it needs to measure for only one side as all four sides are the same.

Side = table side + drop * 2

Following some square-size tables along with recommended tablecloth size

Round Tablecloth

To determine the tablecloth for a round table, add drop length with the diameter of the table

Tablecloth diameter = table diameter + drop * 2

Following some standard round-size tables along with recommended tablecloth size

Oval Tablecloth

The formula is the same as a rectangular tablecloth

Tablecloth length = table length + drop * 2

Tablecloth width = table width + drop * 2

Booth tablecloth

The booth table is usually placed next to the wall. So you have to consider drop length for one of the longest sides and two other wide sides.

You may also need to fix the tablecloth to avoid the cloth slipping off the table.

Length = table length + drop

Width = table width + drop * 2

Conference or Wedding Tablecloth

If you need to décor a wedding or conference room table, consider drop length for one side and let the three other sides hang.

This’ll deliver a more elegant and formal look. 

Length = table length + table height * 2

Width = table width + drop + table height

Tablecloth Runner

The runner-type tablecloth is usually placed in the middle of the table for both decorating and protecting the table from damage.

Many people like to keep the runner tablecloth hanging over the table. But if you want to keep the tablecloth middle of the table, go for the custom option. 

Length = table length + drop * 2

• Consider a slightly larger tablecloth

If your required exact size isn’t available, go for a bit larger tablecloth.

The same advice applies to people who aren’t interested in buying or making custom tablecloths. 

Though a slightly larger tablecloth hangs lower, it’s still better than smaller ones that may not cover the whole table.

Even considering the fabric type, some tablecloths may shrink up to four inches due to washing. 

In this case, a larger tablecloth will turn into an appropriate size. Alternatively, you can choose a rectangular runner cloth as it runs across the middle of the table instead of covering the whole width. Read the next section to learn briefly. 

• Pairing Tablecloth with a Table Runner

A table runner is a piece of dining linen it highlights the table’s center. you can either place it alone on the table or on the tablecloth’s top.

Table runners usually add pattern, pop of color, and depth to the table space. 

Though you can choose any preferable size of the table runner, the runner should be smaller than the tablecloth.

In addition, it is recommended to choose a runner length that is 1 foot shorter than the tablecloth’s length so it can fit perfectly. 

But if you want to use a table runner mostly on a bare table, you can consider a 6-inch drop on both sides. 

If you have a too-wide rectangular table, put two runners side by side on the table or underneath the setting on both sides of the table.

For decorating your round table, place two runners in an X pattern across the table’s center.

Alternatively, you can place a square fabric on the table and then place the runner on top. 

Tips to Consider While Sizing Tablecloth 

Below are some tips to help you decide appropriate size tablecloth and increase its beauty:

• Don’t consider too short a drop length as it won’t let the tablecloth stay in the middle of the table. 

• If your measured size doesn’t match with a standard measurement of the table, go for a custom size. However, it will cost considerably more. 

• Measure drop length keeping the chairs pushed in at the table so you don’t need to pool the fabric in the chair’s seat. 

• Place a vase of candles, flowers, or a bowl in the middle of the table to get a complete and attractive look. 

Tablecloth Styles and Trends

When it comes to decorating a table, the tablecloth is often the foundation of the design.

It sets the tone for the entire table setting and can make a big impact on the overall look and feel of the space.

In recent years, there have been a variety of tablecloth styles and trends that have emerged, each with their own unique aesthetic.

Here are some of the most popular tablecloth styles and trends to consider for your next event or gathering.

Minimalistic and Neutral:

Minimalistic and neutral tablecloths are a popular trend in recent years.

These tablecloths are simple and clean in design, often featuring a solid color or a subtle pattern.

They create a calm and serene atmosphere and allow other elements on the table, such as the centerpiece or place settings, to take center stage.

Neutral colors such as white, beige, and gray are popular choices for this style.

Textured:

Textured tablecloths are another trend that has emerged in recent years.

These tablecloths feature a variety of textures, such as lace, burlap, or linen, that add depth and interest to the table.

Textured tablecloths can be used to create a rustic or bohemian vibe and can be paired with other textured elements, such as napkins or place mats, to create a cohesive look.

Bright and Bold:

Bright and bold tablecloths are a great way to add color and energy to a table setting.

These tablecloths feature bright, vibrant colors and bold patterns that can be used to make a statement or add a pop of color to a neutral space.

This style works well for events such as birthday parties, showers, or other celebrations where a festive atmosphere is desired.

Floral:

Floral tablecloths are a classic tablecloth style that has remained popular for years.

These tablecloths feature a variety of floral patterns, from simple and elegant to bold and colorful.

They can be used to create a romantic or garden-inspired atmosphere and can be paired with other floral elements, such as centerpieces or place settings, to create a cohesive look.

Metallic:

Metallic tablecloths are a trend that has emerged in recent years.

These tablecloths feature metallic accents, such as gold, silver, or copper, that add a touch of glamour and elegance to a table setting.

They can be used to create a sophisticated atmosphere and work well for events such as weddings, anniversary parties, or other formal gatherings.

Geometric:

Geometric tablecloths are a trend that has emerged in recent years.

These tablecloths feature geometric patterns, such as triangles, circles, or squares, that add a modern and contemporary feel to a table setting.

They can be used to create a clean and minimalistic atmosphere and work well for events such as corporate events, conferences, or other professional gatherings.

Customizable:

Customizable tablecloths are becoming increasingly popular, as they offer a unique and personalized touch to any table setting.

These tablecloths can be customized with a specific design, logo, or message, making them a great choice for events such as corporate events, product launches, or other branding opportunities.

Sustainable:

Sustainable tablecloths are a trend that has emerged in recent years.

These tablecloths are made from eco-friendly and sustainable materials, such as organic cotton, linen, or bamboo.

They are a great choice for events where environmental responsibility is a priority.

No matter what your style or event, there is a tablecloth style and trend out there that will suit your needs.

FAQs

Final Thoughts

Our tablecloth size calculator is a valuable tool for anyone planning an event or gathering.

It is simple, easy to use, and provides accurate and precise results.

We hope that our tablecloth size calculator will make your event planning process easier and more enjoyable.