# What size tablecloth for 48 x 72 table?

*We may earn affiliate fees for purchases using our links (at no additional cost to you).*

The right tablecloth can enhance the overall appearance of your dining room like icing on a cake.

It’s therefore crucial to select not only the best fabric, shade, and design, but the appropriate dimensions matter a lot.

So, the question now you have is “what size tablecloth for 48 x 72 table?”.

All the details you really have to understand about standard tablecloth dimensions are included below.

## What Size Tablecloth For A 48 X 72 Table?

The size of tablecloth you need for a 48 x 72 table will mostly depend on the style or shape of the table.

If the table is oval-shaped, the minimum requirement of the tablecloth size will be 60″ x 84″. For an oblong table, you will need a 60″ x 64″ tablecloth.

## Available sizes of tablecloth for 48 x 72 tables:

Table shapes | Tablecloth size (Minimum) | Seating capacity |
---|---|---|

Oval (48″ x 72″) | 60″ x 84″ | 6-8 |

Oblong (48″ x 72″) | 60″ x 64″ | 6-8 |

Banquet Style (48″ x 72″) | 70″ x 92″ | 6-8 |

## Get the perfect tablecloth by measuring your table:

To determine the size of a tablecloth, all one needs to do is get a tape measure.

Then simply measure the width and the length of the table. Then enter those dimensions into a calculator if need be.

However, despite the fact that this is a significant aspect of the formula, it is not the only factor that should be considered.

Simply following these instructions will allow you to obtain the appropriate measurement results:

### 1. Set The Table For Measurement:

This is very straightforward. But without proper attention, you may fail to get the proper dimensions of the table. So, let’s do it the way we recommend.

Take a table that has leaves and is extendable, for instance.

To measure this table effectively, you will have to adjust the length of the table. You can either shrink it or extend it to get the size you will use.

Based on this, the tablecloth size will vary.

In fact, it will also affect the type of tablecloth. You may want to utilize a tablecloth for a casual setting if you use the table very frequently.

On the other hand, the table may be extended to host a formal dinner. In that case, the size and the type of tablecloth will vary significantly.

So, fix the table first before you opt to measure it to get the appropriate size tablecloth.

### 2. Determine the dimensions of the tabletop:

Take into account both the length and breadth of the table. There is this most straightforward method for accomplishing either of these goals.

Just measure outward from the center of the table.

Then, multiplying that number by two will give you the exact dimensions of the table.

### 3. Think About How Much Of A “Drop” You Want:

This is in fact the most significant consideration here. In other words, this is what you are here for. So, do it very cautiously.

First off, determine how much a drop you would like to have for the tablecloth. The drop refers to the amount of cloth that will hang from the table towards the ground.

In most cases, the experts consider a drop of 10-12 inches to be ideal. The rest is basically up to you. So, you may decide whatever length of drop you prefer.

Your table will appear disproportionately small if there are less than six inches. Also, your linens will appear to be of inappropriate size.

In case you want the settings to appear more formal, you will have to opt for longer drops.

However, to get bigger drops, you have to do some additional tasks. More specifically, you have to calculate the distance between the chairs and the table.

If the drop is too long, it will draw too much fabric when one tries to push it under the table. It may also cause the chairs to drape on the laps of the guests.

#### 4. Do the math:

As you have the table measurements and drop plans, you can do the simple math to get the perfect tablecloth size.

Let’s say your table is 48″ in width. You want a drop of 6 inches. Now, you have to multiply the 6 inches drop by two (the drop is for both sides of the table).

So, the result is 12 inches. Now add this up to the table width, which is 48 inches. 48 + 12 = 60 inches will be width of the tablecloth size.

If we do the calculation for the length of the table, we will get the same result. So, we can put the formula this way:

- Table width + drop on side + drop on side = width of the tablecloth
- Table length + drop on side + drop on side = length of the tablecloth

##### 5. Not the exact size:

Don’t freak out if you can’t locate the exact measurement that you’re looking for!

In the event that you have trouble locating the precise size that you desire, the next size will just do fine.

## Rethinking The Drop:

We all want our tablecloths to overhang or have a drop to some extent. So, this is what we determine while calculating the dimensions of the table.

Take into consideration a variety of overhang lengths depending on the situation.

The quantity of the tablecloth that hangs over the edge of the table can, in point of fact, very much determine how the meal will go.

This is true regardless of whether you are preparing a laid-back breakfast or a formal dinner with plated courses. Take, for instance:

### Casual settings:

The overhang should be between 6 and 8 inches for events and lunches that are more casual.

### Flexible use:

An overhang of ten inches is good if you want it to be flexible for everyday use.

### Formal settings:

You will need a 15-inch overhang when setting the table for formal dinners and gatherings.

## FAQs about what size tablecloth for 48 x 72 table:

### What Kind Of Fabric Is Best For Tablecloths?

Cotton, linen, or satin is preferred by most people when it comes to tablecloth fabric.

### How Much Is A Tablecloth?

The range of cost varies based on the fabric, shape, and many things. However, the typical cost is $3-15 per meter.

### How Much Bigger Should A Tablecloth Be Than The Table?

For casual settings, a drop of 6-8 inches is perfectly fine. It won’t mess with the chairs or legs of the people seating. But for formal settings, you will need a drop of more than 10 inches.

## Final Words:

As we are drawing the concluding words here, you already know what size tablecloth for a 48 x 72 table you need.

Utilizing this tablecloth measurement guide, you will be able to acquire the knowledge necessary to properly select tablecloths for your table.

If there still be any confusion whatsoever, the comment box is all yours.